ReadyMadeRC
GAUI 500X QUAD UPGRADE KIT (NO MOTORS, ESCS, GU-344, OR BAG)
,
CAN NOT BE BACK ORDERED GAUI 500X QUADFLYER UPGRADE KIT ...ReadyMadeRC
FY-91Q NAVIGATION EDITION WITH COMPASS AND GPS
,
FY91Q MULTI ROTOR SYSTEM Basics on how the system works: ...ReadyMadeRC
8 CHANNEL SERIALIZER PWM TO PPM ENCODER
,
This serializer, also called a "PWM to PPM encoder" allows ...ReadyMadeRC
12 CHANNEL SERIALIZER PWM TO PPM ENCODER
,
This serializer, also called a "PWM to PPM encoder" allows ...ReadyMadeRC
GAUI CRANE III FULLY ASSEMBLED CAMERA GIMBAL WITH SERVOS
| Size | 170 x 160 x 75 |
| Weight | 312g |
| Side tilt | ± 18.5 degrees |
| Vertical tilt | ± 60 degrees |
Key Features:, ,
Specifications Suitable Model 330X.500X. Other Standard Accessories Optional Accessory V ...ReadyMadeRC
GAUI CRANE II FULLY ASSEMBLED CAMERA GIMBAL SET WITH SERVOS
| Size | 125 x 115 x65 |
| Weight | 97g |
| Side tilt | ± 22.5 degrees |
| Vertical tilt | ± 120 degrees |
Key Features:, ,
Specifications Suitable Model 330X.500X. Other Standard Accessories Optional Accessory V ...ReadyMadeRC
HORNET OSD WITH GPS
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
HORNET OSD + FY31AP (FY-31AP TRADE EDITION)
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| Operating temperature(Unit | ℃) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
REMZIBI OSD PACKAGE
| - Supply power | 7V-14V (ex. lipo 2S - 3S) |
| - weight | 16 gram (OSD + dedicated GPS) |
| http | //www.happykillmore.com/Softwar...etup/Setup.exe |
| http | //www.happykillmore.com/Softwar...p?LANG=English |
| http | //rc-cam.pl/viewtopic.php?p=32498#32498 |
| Package Includes | Remzibi OSD |
Technical data :, Functionality :, - easily PC connection for configuration/calibration purposes using dedicated PC program (HappyKillmore's excellent work), show information DONE :, - latitude (format DDMM.MMMM or DD.DDDDDD can be chosen),
An excellent high quality, low price on screen display. Support ...ReadyMadeRC
OSD PRO EXPANDER
All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...DPCAV
ELOGGER SPEKTRUM/JR INTERFACE CABLE
| Instruction Manual | Click Me! |
NOTE: Before ordering, please consult with your R/C system's instruction manual to ensure your receiver has the FlightLog data port.,
With this accessory cable you can use your eLogger V3 ...DPCAV
5.8GHZ CLOVERLEAF ANTENNA, RHCP
| Center Frequency | 5.8GHz |
| RF Bandwidth | 120MHz |
| Gain, 3-lobe | ~1.2dBiC |
| Beamwidth | 360° omni |
| Polarization | RHCP |
| RF connector | SMA Plug |
| Height | 1.2 inch |
| Width | 1.2 inch |
| Weight | 4.4g |
| REFERENCE PLOTS | ANTENNA RF PATTERNS |
Manufacture:, Aerial Video Systems, Important: To ensure RF performance do NOT add paint or coat the element lobes (leave the factory applied finish as-is). The elements should not be allowed to rest against any structures. Do not bend or deform the elements., NOTE: Some FPV model installations may need an extension to ensure the antenna is away from nearby surfaces.,
The 5.8GHz Cloverleaf antenna is circularly polarized (RHCP) and designed ...DPCAV
5.8GHZ BLUEBEAM ANTENNA SYSTEM, RHCP
| Cloverleaf (3-lobe) for transmitter | Click Me! |
| Skew Planar Wheel (4-lobe) for receiver | Click Me! |
| Center Frequency | 5.8GHz |
| RF Bandwidth | 120MHz |
| Gain, 3-lobe | ~1.2dBiC |
| Gain, 4-lobe | ~0.9dBiC |
| Beamwidth | 360° omni |
| Polarization | RHCP |
| Multipath rejection | ~9db typical |
| RF connector | SMA Plug |
| Height | 1.2 inch |
| Width | 1.2 inch |
| Weight | 4.4g each |
| REFERENCE PLOTS | ANTENNA RF PATTERNS |
This 5.8GHz antenna system contains TWO antennas:, One for the transmitter and one for the receiver., If you are looking for replacements then we also sell them individually, as follows:, , Manufacture:, Aerial Video Systems, Important: To ensure RF performance do NOT add paint or coat the element lobes (leave the factory applied finish as-is). The elements should not be allowed to rest against any structures. Do not bend or deform the elements., NOTE: We offer very low-loss extension cables that are specifically designed for the BlueBeam antenna system. Some FPV model installations may need an extension to ensure the antenna is away from nearby surfaces.,
The 5.8GHz Bluebeam antenna system is circularly polarized (RHCP) and ...HobbyKing
NTM PROP DRIVE SERIES 28-26A 1200KV / 250W (SHORT SHAFT VERSION)
| Max current | 18A |
| Shaft | 3mm |
| Weight | 57.6g |
| ESC | 20A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 28-26A 1200kv (short shaft version), Kv:1200rpm/v, Max Power:, 200W @ 12v (3S) / 250W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 7x6E - 11.1v - 90W - 8A,
This is a short shaft version of our popular NTM ...5 Reviews