HobbyWireless
HORNET OSD + GPS KIT
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, The Hornet- OSD overlays flight telemetry information onto your video image. The telemetry information displayed includes flight altitude, flight speed, flight direction, and home direction and so on. You also can save the telemetry information to a MICRO SD card (, The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:,
sold separately ), then realizing trace playback via FYGCS. The ...HobbyWireless
DJI SPREADING WINGS S800 HEXA COPTER
| Features | 1. High Stability |
| 1. Diagonal axis length | 800 mm |
| 2. Takeoff Weight | 6 kg |
| 3. Load Weight | 2 kg |
Details:, , S800 Package Includes:, Arm (ESC 2-6S 40A; Motor 4114 kv320) x 6 pcs, Technical Specs:,
The "SPREADING WINGS S800" is DJI's latest "Hex-Rotor" platform. The ...HobbyWireless
HORNET OSD + FY-31AP FLIGHT STABILIZER SYSTEM, GPS AUTO-PILOT FUNCTIONS
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, FY-31AP, By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , • FY-31AP module:, , • GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following:, , The modes are shown as below:,
Attitude Flight Stabilization System (AFSS) 1. Attitude Flight Stabilization System ...HobbyWireless
FY-91Q NAVIGATION EDITION
| System Specifications | FY-91Q Module |
| Mode 3 | Return to Home |
| Mode 1 | Stabilizer Mode |
| Mode 1 | Stabilized Mode |
| Mode 2 | Automated Hover Hold. |
| Mode 3 | Automated Return to Home Mode. |
Details:, FY-91Q flight controller for helicopters, What's Included:, , FY-91Q Navigation Edition contains the following hardware:, • FY-91Q control module x 1;, :, The FY91Q can be installed and flown it the following multi-rotor aircraft:, , :, FY-91Q have been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems, Mode 2:, Automated Hover Hold,
Multi-rotor flight stabilization & Autopilot System • FY91Q RC receiver ...LowPriceRC
ARK X-400 PRO EP HELICOPTER KIT
| Length | 630mm (25 inches) |
| Height | 225mm (9 inches) |
| Main Rotor | 588mm (23 inches) |
| Tail Rotor | 150mm (6 inches) |
| Flying Weight | 580 - 650 grams (20.5 - 23 ounces) |
| Requires | 6 channel heli-radio w/4 micro servos, gyro, brushless motor & ESC, |
SPECIAL PROMOTION:, , Gear Drive Ratio : 1:9.85:5,
ARK's electro-powered X-400 time and time again offers some of ...LowPriceRC
FEIYU TECH FLIGHT STABILIZATION SYSTEM PRO
| Input Voltage | 4-6V |
| Current draw | 52mA (5V) |
| Size | 55 x 33 x 20mm |
| Weight (excluding wires) | 20g |
| Temperature range | -25ºC - +70ºC |
| Max rate of rotation | less or equal to 500ºC/s |
Specification:, , Packing Including:,
FY-90Q PRO controller is specially designed for QuadCopter use. The ...RCTimer
RADIO FOR TELEMETRY AIR MODULE 433MHZ
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | 17mmx |
| Weight | 4.6g |
Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio for telemetry Air Module 433Mhz The RCTimer Radio ...RCTimer
RADIO FOR TELEMETRY GROUND MODULE 433MHZ
| http | //www.hoperf.com/upload/rf_app/HM-TRP.pdf |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| •Dimension | 17mmx59mm(no include SMA connector) |
| •Weight | 7.2g/17g(include antenna) |
Datasheets of HM-TRP module:, Documentation:, Radio Configurator:, Board schmatic:, Other,
RCTimer Radio for telemetry Ground Module 915Mhz The RCTimer Radio ...RCTimer
433MHZ RADIO TELEMETRY KIT
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | Air / Ground module(no include SMA connector) |
| Weight | Air / Ground module |
It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 433Mhz ; and in the following configurations:, serial board (for the air) and USB (for the ground)., Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio Telemetry Kit 433Mhz The RCTimer Radio telemetry system ...RCTimer
(4PAIRS) 10X3.8" CARBON FIBER CW CCW PROPELLERS
| - Material | Carbon fiber |
| - Size | 10*3.8" |
Product Description:, , Package:, one prop rotates clockwise cw x 2,
(2 Pairs) 10x3.8" Carbon Fiber CW CCW Propellers - Epoxy ...RCTimer
HP-550BLACK MULTICOPTER SETS
| Wheelbase | 550mm |
| Weight | 478g(Appr) |
Package:, HP2212-1000kv brushless motor x 6 sets (,
SM550 V2 -SK30 - HP2212-1000KV Kits 10X4.5" Carbon Fiber Made ...RCTimer
RADIO FOR TELEMETRY AIR MODULE 915MHZ
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | 17mmx |
| Weight | 4.6g |
Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio for telemetry Air Module 915Mhz The RCTimer Radio ...RCTimer
RADIO FOR TELEMETRY GROUND MODULE 915MHZ
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | 17mmx |
| Weight | 7.2g |
Documentation:, Radio Configurator:, Board schmatic:, ,
RCT Radio For Telemetry Ground Module 915Mhz The RCTimer Radio ...RCTimer
915MHZ RADIO TELEMETRY KIT
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | Air / Ground module(no include SMA connector) |
| Weight | Air / Ground module |
It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz ; and in the following configurations:, serial board (for the air) and USB (for the ground)., Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio Telemetry Kit 915Mhz The RCTimer Radio telemetry system ...RCPlanet
ALIGN 450 SPORT V2 FUSELAGE PARTS AGNH45151
, Weight:, 19.6g, ,
Align fuselage parts for the -REX 450 Sport V2. Must ...