HiModel
WFLY 2.4G 7-CHANNEL RECEIVER WFR07S
| Receiver Model | WFR07S |
| Range test in ground | more than 800M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR07S) 7 channel 2.4GHz Receiver, Use in： airplane, helicopter, glider, car, boat, Band： 2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity： -97dBm, Fail safe , quick recover signal, Modulation： PPM/PCMS 1024/PCMS 4096, Power： 4.8-6V, Dimension： 40.42×27.27×11.88mm, Weight： 9.6g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
WFLY 2.4G 9-CHANNEL RECEIVER WFR09S
| Receiver Model | WFR09S |
| Range test in ground | more than 900M |
| Dual MCU, dual antenna receiver | Contains two receivers working independently |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR09S) 9 channel 2.4GHz dual MCU, dual antenna receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, Features:, Choose the optimum signal for antenna, More reliable, Quicker response, Better anti-interference, Longer range, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...5 Reviews
HiModel
WFLY 2.4G 4-CHANNEL MINI RECEIVER WFR04S
| Receiver Model | WFR04S |
| Range test in ground | more than 600M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR04S) 4 channel 2.4GHz Receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Fail safe , quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：24×14mm, Net Weight：2.2g (Gross Weight：2.8g), , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
WFLY 2.4G 6-CHANNEL MINI RECEIVER WFR06S
| Receiver Model | WFR06S |
| Range test in ground | more than 700M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR06S) 6 channel 2.4GHz Receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe ,quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...2 Reviews
HiModel
WFLY 2.4G FUTAB/HETIC COMPATIBLE RF MODULE W/WFR06S RECEIVER
| Module Model | WFTRFS |
| Application | Airplane, helicopter, glider, car, boat |
| Band | 2.400GHz-2.4830GHz( varies with different country and region) |
| Output power | ≤100Mw |
| Current drain | ≤150mA |
| Modulation | PPM/PCMS 1024 /PCMS 4096 |
| Power | 9.6-12V |
| Dimension | 59×37×34mm |
| Weight | 40.9g |
| Receiver Model | WFR06S |
| Range test in ground | more than 700M |
, , , , , , Specifications:, , , , , , , , , , , 2.4Ghz SET C (WFTRFS+WFR06S)--2.4GHz module with 6 channel 2.4GHz receiver, Radio frequency working statue checking function, Fail Safe, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：34.85×21×11.3mm, Weight：6.0g, , ,
Features: The specification of 2.4Ghz receivers: A. Hopping frequency is ...HiModel
WFLY 2.4G FUTAB/HETIC COMPATIBLE RF MODULE W/WFR07S RECEIVER
| Module Model | WFTRFS |
| Application | Airplane, helicopter, glider, car, boat |
| Band | 2.400GHz-2.4830GHz( varies with different country and region) |
| Output power | ≤100Mw |
| Current drain | ≤150mA |
| Modulation | PPM/PCMS 1024 /PCMS 4096 |
| Power | 9.6-12V |
| Dimension | 59×37×34mm |
| Weight | 40.9g |
| Receiver Model | WFR07S |
| Range test in ground | more than 800M |
, , , , , , Specifications:, , , , , , , , , , , 2.4Ghz SET B (WFTRFS+WFR07S)-- 2.4GHz module with 7 channel 2.4GHz receiver, Radio frequency working statue checking function, Fail Safe, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：40.42×27.27×11.88mm, Weight：9.6g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
WFLY 2.4G FUTAB/HETIC COMPATIBLE RF MODULE W/WFR09S RECEIVER
| Module Model | WFTRFS |
| Application | Airplane, helicopter, glider, car, boat |
| Band | 2.400GHz-2.4830GHz( varies with different country and region) |
| Output power | ≤100Mw |
| Current drain | ≤150mA |
| Modulation | PPM/PCMS 1024 /PCMS 4096 |
| Power | 9.6-12V |
| Dimension | 59×37×34mm |
| Weight | 40.9g |
| Receiver Model | WFR09S |
| Range test in ground | more than 900M |
| Dual MCU, dual antenna receiver | Contains two receivers working independently |
, , , , , , Specifications:, , , , , , , , , , , 2.4Ghz SET A (WFTRFS+WFR09S)--2.4GHz module with 9 channel 2.4GHz dual MCU, dual antenna receiver, Radio frequency working statue checking function, Fail Safe, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, Features：, Choose the optimum signal for antenna, More reliable, Quicker response, Better anti-interference, Longer range, Notes：For better preformance, place two antennas in 90 degree, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
FRSKY TWO-WAY 2.4G DHT MODULE - TOGGLE SWITCH VERSION
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 3072 (>11bit) |
, , , , , , , , Features:, , , , , , , , , , , THIS IS THE NEW TOGGLE SWITCH VERSION DHT., 1.1 Compatibility:, Switch 1, , Switch 2, , Mode of DHT, , Compatibility, , OFF, , OFF, , Two-way Mode, , Two way telemetry receivers (D8R, D6FR), , OFF, , ON, , V8 Mode, , V8 receivers (V8FR-HV, V8R7-HV, V8R7-SP, V8R4), , 1.2 Specifications:, 2. Setup, 2.1 Installation process:, 1）Open the transmitter, find out Battery power supply line, PPM signal line, and GND., 2）Take the order and solder Battery power supply line, PPM signal line, and GND to DHT with 3 wires., (RED→V+; BLACK→GND; YELLOW→PPM), 3）Drill one hole on the transmitter to install the PCB with F/S button, GREEN/RED LED and two switches., 4）Connect the antenna connector at the port on transmitter board., 5）Drill a hole for antenna connector at suitable space on the transmitter (diameter 7mm is suitable)., 6）Fix the transmitter antenna on the connector .Turn the transmitter power on and check the power indicator LED, which is normally light RED., 2.2 Bind procedure, 1）Turn your transmitter on and switch it to PPM mode. Turn your transmitter off., 2） Turn your transmitter on while holding the F/S button on the transmitter module (Please make sure DHT is in its corresponding mode when working with V8 or two way telemetry receivers). Release it in a few seconds. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind the receiver., 3）Connect battery to the receiver while holding the F/S button on the receiver. The RED LED on the receiver will flash, indicating the binding process is completed., 4）Turn on the transmitter and re-connect battery to the receiver. The RED SOLID LED on the receiver will indicate the receiver is receiving commands from the transmitter., 5）After the above steps are completed, both the transmitter and the receiver are ready to be used., Notice: When working with two way telemetry receivers (D8R or D6FR), please kindly make sure that the battery ,
Features: THIS IS THE NEW TOGGLE SWITCH VERSION DHT. 1.1 ...1 Reviews
HiModel
CORONA 4-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER W/S.BUS R4FA-SB
| Channel number | 4ch |
| Operating Current | 50mA max |
| Operating Voltage | 3.6 ~10V |
| Latency | R4FA-SB’s description |
| Sensitivity | about -100dBm |
, , , , , , Specifications:, , , , , , , , , , , 14mS for independent 4 channel output and S.BUS output @ FASST multi-channel mode, 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode, 16mS for independent 4 channel output and S.BUS output @ FASST 7ch mode, 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode, 14mS for independent 3 channel output@ FASST surface system C1 CODE mode, R6FA-SB’s description, 7mS for independent 6 channel (HS) output@ FASST multi-channel mode, 14mS for independent 7 channel (LS) output and S.BUS output @ FASST multi-channel mode, 8ms for independent 6 channel (HS) output@ FASST 7ch mode, 16mS for independent 7 channel (LS) output and S.BUS output @ FASST 7ch mode, 14ms for independent 3 channel output@ FASST surface system C1 CODE mode, Operation temperature:, -10~80 deg C, , ,
Features: Compatibility: The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ...HiModel
CORONA 6-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER W/S.BUS R6FA-SB
| Type | R6FA-SB |
| Channel number | 4ch |
| Operating Current | 50mA max |
| Operating Voltage | 3.6 ~10V |
| Latency | R4FA-SB’s description |
| Sensitivity | about -100dBm |
, , , , , , Specifications:, , , , , , , , , , , 14mS for independent 4 channel output and S.BUS output @ FASST multi-channel mode, 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode, 16mS for independent 4 channel output and S.BUS output @ FASST 7ch mode, 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode, 14mS for independent 3 channel output@ FASST surface system C1 CODE mode, R6FA-SB’s description, 7mS for independent 6 channel (HS) output@ FASST multi-channel mode, 14mS for independent 7 channel (LS) output and S.BUS output @ FASST multi-channel mode, 8ms for independent 6 channel (HS) output@ FASST 7ch mode, 16mS for independent 7 channel (LS) output and S.BUS output @ FASST 7ch mode, 14ms for independent 3 channel output@ FASST surface system C1 CODE mode, Operation temperature:, -10~80 deg C, channel number: 6, , ,
Features: Compatibility: The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ...HobbyKing
SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM
| Dimensions control unit | 34x23.8x11mm |
| Dimensions sensor | 20.6x20.6x9.6mm |
| Sensor lead | 160mm length |
| Standard setup | DataPod |
| Computer connectivity | DataPod Bridge Mode |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <100mA |
Features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,
Designed for 3D Pro pilots and beginner alike the Vortex ...HobbyKing
SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM W/DATAPOD
| Dimensions control unit | 34x23.8x11mm |
| Dimensions sensor | 20.6x20.6x9.6mm |
| Sensor lead | 160mm length |
| Standard setup | DataPod |
| Computer connectivity | DataPod Bridge Mode |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <100mA |
Key features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,
Designed for 3D Pro pilots and beginner alike the Vortex ...HobbyKing
WALKERA RC MAGIC CUBE MTC-01 DEVENTION TRANSMITTER MODULE FOR WK/ANDROID
| Features | • Compact size |
| Frequency | 2.4GHz FH |
| Output Power | Less than 10mW |
| Overall Unit Current | Less than 35mA |
| Battery | 3.7V 80mAh |
| Weight | 10g |
Specs:, Includes:, Walkera RC Magic Cube, *Note:, Trainer port must be capable of outputing PPM signal.,
The RC Magic Cube allows you to use any transmitter ...5 Reviews
ReadyMadeRC
SMARTFPV - 3 WAY RC VIDEO SWITCH BY KRISTAPS
PPM control from RC ..." />
| All pin headers have same pin functions | GND, +V, Video |
Introduction:, SmartFPV 3 way RC video switch allows switching between 3 cameras while flying FPV. You can switch between flight camera, back view camera and camera facing down or use switch to see view from camera that takes pictures., Features:, - 3 video inputs, 1 video output, Connecting:, You can connect RC video switch to RC receiver’s regular servo channel or sum PPM connector. It will automatically detect type of RC signal., Configure PPM control channel:, To change PPM channel used to control video switch you need to toggle 8 times needed transmitter switch within 10s after video switch is powered ON., Video connectors:, SmartFPV video switch has 3 video inputs and 1 video output. Connection is made with common 3 pin servo style connectors., Video power:, All middle pins of 3 pin video connectors are interconnected to share same power between video cameras and video transmitter connected. You can power all devices either by feeding voltage to one of video devices connected or by soldering additional leads to battery input and connect battery. Battery connection leads are not included.,
- Regular servo channel or sum PPM control from RC ...HobbyKing
ORANGERX DSMX/DSM2 2.4GHZ DIY TRANSMITTER MODULE
| • 4 operating modes | DSM2 1024/22ms, DSM2 2048/11ms, DSMX 22ms, DSMX 11ms |
| 2.4Ghz protocol | DSMX/DSM2 |
| Voltage input | 6~15VDC |
| Power | 100mW |
| Range | Full range system |
Features:, Specs:, Compatibility:, Any transmitter with a PPM signal output, Includes:, OrangeRX DSMX/DSM2 2.4Ghz DIY transmitter module, NOTE:, 1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance,
The OrangeRX DSMX/DSM2 2.4Ghz DIY transmitter module offers a simple ...5 Reviews