BevRC
TAROT T2D GOPRO HERO3 TWO-AXIS BRUSHLESS GIMBAL/WITH GYRO
| 7, support Receiver | conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver |
| 8, support for remote devices | PPM/PCM/2.4G |
| 9, the working voltage | DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery) |
| 10, working current | 200mA-500mA (power supply voltage and the motor related) |
| 11, the working environment temperature | -15 ℃ ~ 65 ℃ |
| 12, the processor | Dual 32-bit high-speed ARM core processor |
| 13, the sensor | Three rotor MEMS gyroscope rotor MEMS accelerometers and the three |
| 14, the maximum angular rate | 2000°/ sec |
| 15, the maximum acceleration | 16g |
| 16, the control frequency | 2000Hz |
| 17, the motor drive frequency | 20KHz (no noise smoothing driven) |
| 18, the control accuracy | 0.1° |
| 19, the control angle range | -45 °~ 45 °(roll), -135°~ 90°(tilt) |
| 20, pose solver algorithms | PTZ dedicated brushless motor decoupled EKF algorithm |
| 21, for shooting equipment | GOPRO Hero3 |
| Weight | 195g |
Gopro two-axis brushless PTZ English software description and download link:, , Product Features:, 1, support GOPRO Hero3 video auxiliary output, Related Part Number:, Head hanging hook TL68A01, Specifications:, GOPRO brushless pan rack assembly TL68A08 x1,
Download the manual here. T-2D PTZ is TAROT company for ...BevRC
RLINK 8R-S DIVERSITY RECEIVER
| Note | you can set the PPM sequence to affect the Sbus output also |
BevRC
EZUHF RECEIVER, 8 CHANNEL 'LITE'
,
Failsafe, preset by button on the EzUHF transmitter Reliable FHSS ...BevRC
EZUHF RECEIVER, 8 CHANNEL DIVERSITY
,
Reliable FHSS Link (Frequency Hopping, Spread Spectrum)433MHz/70cm Ham band operation-112dBm ...BevRC
CHAINLINKDARE UHF LONG RANGE SYSTEM
| https | //bevrc.zendesk.com/entries/22403922-important-notice-for-chainlinkdare-users |
| Voltage： Tx：7-16V(2s or 3s lipo),Rx | 4.8-6V |
Please do check the note for the new batch of Chainlinkdare:, :Order shipped after 17th, Nov,2012 will be included all related antennas., New features compared to the old ChainLink:, --True diversity receiver,
New batch with better power solution, compatible better with JR ...BevRC
CRIUS KK V5.5 X4 FIRMWARE V2.6
,
Latest KKmulticontroller V5.5 Board,V2.6 program w/ USBasp programmer Circuit Board ...BevRC
YS-X4 MULTI-ROTOR FLIGHT CONTROLLER---NAVIGATOR VERSION
| Your purchase includes | 1 WIFI module X1 |
Download the quick start guide here:, , What's added to the version:, 1 Target Lock & Fly encircle (No limitation), Product Features:, 1 Auto (Takeoff/ Go Home/Landing), Specification:, , Version differences:, The bluthtooth version has been cancelled beause of the compatible problem.,
2 Click/Touch & Fly To Point (No limitation) 3 Auto-Navigation ...BevRC
YS-X4 MULTI-ROTOR FLIGHT CONTROLLER---WIFI VERSION
Download the quick start guide here:, , Product Features:, 1 Auto (Takeoff/ Go Home/Landing), Your purchase Includes:, 1 the WIFI module X1, Specification:, , Version differences:, The bluthtooth version has been cancelled beause of the compatible problem.,
YS-X4 Autopilot system for multi-rotor is specially designed for Hobbyist. ...BevRC
FRSKY TFR8SB- COMPATIBLE WITH FUTABA FAAST RADIO WITH SBUS AND RSSI PORT
| FASST 2.4GHz Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc |
| Model | TFR8SB (8CH FASST compatible receiver with RSSI & SB ports) |
| Dimension | 44.5*27.5*17mm |
| Operating Voltage Range | 3.5~10V |
| Operating Temperature Range | -10℃~80℃ |
| Mode A | RED LED blinks |
| Mode B | GREEN LED blinks |
:11.5g, :, 14ms (FS – Normal Speed Mode), Note: Be sure that when using battery or regulated output from ESC, the capacity must meet the usage conditions of servos., Use native failsafe position preset on the transmitter side:, If not disabling failsafe on the transmitter side, TFR8SB will use native failsafe position preset on the transmitter side., Set failsafe on TFR8SB side:, TFR8SB supports failsafe function for all channels. Follow the steps below to set failsafe on TFR8SB:, 1) Bind the receiver first, and disable failsafe on the transmitter side;, Note: HS mode is only applied for high-speed digital servos. Other servos should select FS mode, otherwise servos will get hot or even burn out., Note: Do not perform linking procedure while motor’s main wire is connected or engine is operating, otherwise damage may occur. After linking is completed, recycle the receiver power and check if the receiver is really under control by linked transmitter.,
It's a good choice for your multi-rotor with Naza or ...BevRC
DJI NAZA-M LITE WITH GPS COMBO
| Please note | Naza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED. |
| Motor Disarm | There are two modes of Motor Disarm |
| http | //www.dji-innovations.com/tutorial/naza-m-lite-tutorials-en/ |
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. ., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points,the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., For all the product info and support, please check here:,
Introducing the all new DJI Naza-M Lite. Our industry leading ...BevRC
MYFLYDREAM AUTOPILOT
Main Features:, 1. All In One design. AutoAntennaTracking/AHRS based AutoPilot(3-Axis gyro+accelerometer,
MyFlyDream AutoPilot unit MFD AutoPilot unit x 1 LS20033 GPS ...BevRC
SKYZONE SKY01 VIDEO GOGGLES
Free Download:, SKY01 Manual-V1.0.doc,
Support most of the 5.8G video tranmitters in the market. ...BevRC
RLINK 16-CHAN LONG RANGE UHF SYSTEM
Free Download:, Rlink_Quick_Start_Guide_v1.1.pdf, Free Download:, Rlink_Quick_Start_Guide_v1.1.2.pdf, Free Download:, Firmware&Config-1.1.2.zip, Rlink has every function you need for a UHF system and more:, , :, , :73*65*15mm, :64g, :7, :, 180ma@12v, low power mode, Your purchase includes:, 1 * Rlink Tx, A video shot of 500m height and 30km range flight:, , A 23km video flight by the MFD AAT developer:,
This is a very popular long range system in our ...BevRC
RLINK 8R DIVERSITY RECEIVER
Spec:, The first UHF solution support 16-chan perfectly, proven with Taranis X9D and Jeti DC16., Your purchase includes:, 1 * Rlink 8R diversity receiver,
Based on the latest RF solution, super high sensitivity as ...BevRC
RLINK 16-CHAN LONG RANGE UHF SYSTEM WITH 8R-S COMBO
Rlink has every function you need for a UHF system and more:, Features:, , :, , :73*65*15mm, :64g, :7, :, 180ma@12v, low power mode, Your purchase includes:,
The latest version v1.1.4 firmware with 8R-S diversity receiver, the ...