HobbyWireless
FATSHARK DOMINATOR HEAD TRACKER MODULE
- Futaba | in general Futaba 7 series radios and above support the HT |
Unsupported radios | - Hitec Aurora9 |
Details:, This Head tracker module is specially and exclusively designed for the FatShark Dominator video glasses only., Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
Thanks to the modular feature of Dominator video glasses, this ...HobbyWireless
FRSKY DH-U SENSOR HUB, SENSORS AND LCD-FDD_LITE
Voltage Division Ratio (selectable) | A1/A2/Voltage |
Unit Set (selectable) | Speed (m/s or MPH) |
Alarm Set | A1_1/2, A2_1/2, RSSI_1/2 |
Compatibility | FrSky DFT, DJT and DHT |
Dimension | 46*25MM |
Pixel | 128*64 |
Model | DHT-U |
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 3072 (>11bit) |
Weight | 74g |
Details:, DH-U combo DHT-U 2.4GHz telemetry system., Features:, Show in-flight data via in-built display;, Note: Due to incaution, pins definition for Aurora 9 on the guide sheet of "Pins Definition for PPM Signal" going with certain DHT-U combo was mislabeled.,
It's a duplex built-in receiver and 2.4 GHz transmitter module. ...HobbyWireless
FY-91Q NAVIGATION EDITION
System Specifications | FY-91Q Module |
Mode 3 | Return to Home |
Mode 1 | Stabilizer Mode |
Mode 1 | Stabilized Mode |
Mode 2 | Automated Hover Hold. |
Mode 3 | Automated Return to Home Mode. |
Details:, FY-91Q flight controller for helicopters, What's Included:, , FY-91Q Navigation Edition contains the following hardware:, • FY-91Q control module x 1;, :, The FY91Q can be installed and flown it the following multi-rotor aircraft:, , :, FY-91Q have been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems, Mode 2:, Automated Hover Hold,
Multi-rotor flight stabilization & Autopilot System • FY91Q RC receiver ...HobbyWireless
TSLRS V6 PRO UHF TRANSMITTER - INCREASES THE RANGE OF RC RADIOS
RF Power output | 0.5W or 1W or 2W. The 2W setting can now be used as long as you like. use selectable |
Supply Voltage | 6-25V using internal switchmode converter also included inside the nice aluminium |
Supply current | depends on input voltage, but input power is 3 times RF out power |
Spurs | < 60dB and 80dB under carrier, improved new double low pass filter |
Temperature range | -40C to +70C tested |
Hitech Aurora 9, take out normal RF module and use module pins from left | 1=ppm, 2=supply, 3=GND (4 and 5 are not used) |
Details:, The New PRO version released Feb2012 is a improved version of the V5., Includes:, 1x Transmitter PRO V6 0.5-2W 433Mhz built in regulator,
New radio system, still compatible with older versions rx With ...HobbyWireless
M.I.G. HEAD TRACKER FOR FUTABA, DX8, FLYSKY, TH9B, IMAX 9X, TURNIGY 9X AND MORE...
- Futaba | in general Futaba 7 series radios and above support the HT |
Unsupported radios | - Hitec Aurora9 |
Details:, Fatshark came out with M.I.G, a new head tracking system that uses a combination of Magnetic Inertion Gyro, Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
sensors that self-corrects any drift. No need to be pointing ...HobbyWireless
TSLRS TX700 UHF TRANSMITTER
Details:, The Tx700 features all the good know functions from previous versions, but with the new hardware and software, it support Fixed/Variable PPM input, Futaba input, all up to 12Channels, it has Head tracker input, AUX input (for option boards), Option board port, output power switch, Firmware update port, Status Led, Military standard input plugs with screw protection, and a new design that reduces the height dramatically. Tx700 also supports sequential fail safe, can be upgraded(with option board) to a wireless modem(bidirectional), with serial control thru USB. Remember to buy the TSLRS USB upgrader. Kit also includes a deluxe gift-box for high level of protection, 1 antennas, 2 TSLRS vinyl stickers to let your buddies know what equipment you are flying with. 1 TSLRS Keyhanger, and a calibration chart that verifyes the human touch, and the calibrated output and testing of the hardware.,
HobbyWireless
NORMAL RANGE 433MHZ RECEIVER NR 700
Details:, Rx700NR is a small and very light receiver with a sensitivity of -102dBm and a uptimized input filter so it can co-exist with strong 2.4Ghz on board video transmitters. The wire antenna is mounted directly on the rx. It is the newest version launched first week of August, it features a updated external firmware upgrade port, running LED, completely new software, that offers select-able PPM/PWM (S-Bus planned to come soon) upon boot, it has also sequential fail safe, that lets you store a fail-safe pattern of 3 interactions when it hits fail safe. Thru the firmware port, you can also access TSLRS debug tools for viewing amounts of fail-safes, blocked channels, with a graphical interface for your PC. (TSLRS USB programer need'ed) remember to order a programmer. Kit also includes a deluxe gift-box for high level of protection, 2 TSLRS vinyl stickers to let your buddies know what equipment you are flying with.,
HobbyWireless
LONG RANGE 433MHZ DIVERSITY RECEIVER W POWER BOOST
Details:, Rx700LR+PSU has much higher immune PSU for big/digital Servos, that draws a lot of power, if not the receiver may restart during power peak the servos. It features a updated Diversity system, updated RSSI system, external firmware upgrade port, completely new software, that offers select-able PPM/PWM (S-Bus planned to come soon) upon boot, it has also sequential fail safe, that lets you store a fail-safe pattern of 3 interactions when it hits fail safe. Thru the firmware port, you can also access TSLRS debug tools for viewing amounts of fail-safes, blocked channels, diversity performance and much more, with a graphical interface for your PC. (TSLRS USB programer need'ed) remember to order a programmer. Kit also includes a deluxe gift-box for high level of protection, 2 antennas, 2 TSLRS vinyl stickers to let your buddies know what equipment you are flying with.,
HobbyWireless
TSLRS LONG RANGE 433MHZ RX700 DIVERSITY RECEIVER
Details:, Rx700LR, is the newest version launched first week of August, it features a updated Diversity system, updated RSSI system, external firmware upgrade port, completely new software, that offers select-able PPM/PWM (S-Bus planned to come soon) upon boot, it has also sequential fail safe, that lets you store a fail-safe pattern of 3 interactions when it hits fail safe. Thru the firmware port, you can also access TSLRS debug tools for viewing amounts of fail-safes, blocked channels, diversity performance and much more, with a graphical interface for your PC. (TSLRS USB programer need'ed) remember to order a programmer. Kit also includes a deluxe gift-box for high level of protection, 2 antennas, 2 TSLRS vinyl stickers to let your buddies know what equipment you are flying with.,
HobbyWireless
W-TRACKER WIRELESS HEAD TRACKER SYSTEM
Details:, , The package includes:,
This is the newest concept in head tracking system for ...HobbyWireless
EZUHF RX LITE RECEIVER 8 CH
Power Requirements | ► 9-12v DC 85m. |
Details:, The EzUHF R/C control system is a reliable R/C control up link for FPV and UAV pilots who desire a robust control system for safe control at longer distances., Features/ Specifications:, ► Reliable FHSS Link, Dimensions:, ► 85 x 74 x 23mm 118g., Note:, How to make your own antenna for this receiver.,
It was designed with the FPV/ UAV pilot in mind, ...HobbyWireless
EZUHF LONG RANGE RADIO CONTROL TRANSMITTER
Details:, If you're looking to to extend the range of your RC radio transmitter to further with your RC model, then we the EZUHF is one of the best options available in the market., Features:, , Features:, ► Height 69.8 mm.,
It's an fantastic piece of engineering, it's a must-have for ...HobbyWireless
DRAGON OSD GPS NAVIGATION SYSTEM MAIN BOARD ONLY - NO GPS ANTENNA OR CURRENT SENSOR
Voltage | 2 ports |
Current | 1 port |
IMU | Artificial horizon |
Details:, The Dragon OSD+ v2 is the newest analog OSD from DragonLabs., :, , GPS:, Altitude, Ground speed, Coordinates, Satellites, Track heading, Home heading, LOS Distance, Distance to home, Barometer:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, : Magnetic heading and GPS, : Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, : Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Way points:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), Package includes:, , Optional accessories not included:, , Software/Firmware and Manual:,
It provides a light and low cost board, but high ...HobbyWireless
DRAGON OSD GPS NAVIGATION SYSTEM COMBO
Voltage | 2 ports |
Current | 1 port |
IMU | Artificial horizon |
Details:, The Dragon OSD+ v2 is the newest analog OSD from DragonLabs., :, , GPS:, Altitude, Ground speed, Coordinates, Satellites, Track heading, Home heading, LOS Distance, Distance to home, Barometer:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, : Magnetic heading and GPS, : Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, : Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Way points:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), Package includes:, , Optional accessories not included:, , Software/Firmware and Manual:,
It provides a light and low cost board, but high ...HobbyWireless
DRAGONLINK V2 - COMPLETE LONG RANGE SYSTEM FOR RADIO CONTROL
Details:, , Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The Dragonlink became one of the most popular long range ...