HiModel
X-CAM CAMERA MOUNT CM140 - FULL CARBON VERSION (SUIT FOR GOPRO, SONY NEX5 ETC.)
| Width | 140mm |
| High | 110mm |
| Length | 100mm |
| Weight | 98g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: 2 x thrust bearing 2 x Amortisseurs Supports midsize ...1 Reviews
HiModel
X-CAM INFRARED SHUTTER REMOTE CONTROLLER FOR NIKON CAMERAS
| Dimension | 20 x 12 x 8mm |
| Weight | 0.9g |
, , , , , , Specifications:, , , , , , , , , , , X-CAM Infrared Shutter Remote Controller for Nikon Cameras, This version is for Nikon cameras., , ,
Features: Typical application: Control your on-board camera with your aircraft ...HiModel
FY-91Q MULTI-ROTOR FLIGHT STABILIZATION & AUTOPILOT SYSTEM
, , , , , , Specifications:, , , , , , , , , , , FY-91Q Module, Operating voltage ：4.0~6.0 Volt, Current consumption ：50mA (5V input), Dimensions ：55 x 33 x 20 mm, Weight (not including wires) ：20g, Operating Temperature ：-25°C~ +70°C, The maximum allowable rotation rate ： 3 rotations per minute, APPLICABLE AIRCRAFTMODELS, The FY91Q can be installed and flown it the following multi-rotor aircraft:, - 4 motored quadcopters;, - Tri-axial rotory aircraft with 6 motors, - Six-axial multi-rotor aircraft (6 motors), REMOTE CONTROL SYSTEM COMPATIBILITY, FY-91Q have been tested to work with the following RC systems:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, · Graupner/JR PPM 8, PPM 12, SPCM mode；, · MPX PPM8, PPM 12 with UNI mode, · Any remote control system using the standard of 1.5 ms neutral position., , ,
Features: THIS IS FY91Q MODULE ONLY, THE GPS & COMPASS ...HiModel
FPV 720X 480 HIGH DEFINITION CMOS CAMERA CM210 PAL (14G ONLY)
| Sensor | CMOS |
| Resolution | 720x480 200 Million pixel |
| Power Input | 7-12V |
| Video resistance | 75Ω |
| Lens angle | 90 degree |
| Minimum illuminance | 2 LUX/F1.2 |
| Video frame number | 25 frames, PAL |
, , , , , , Specifications:, , , , , , , , , , , Audio: No, , ,
Features: This camera is specially designed to use with Pan ...2 Reviews
HiModel
FULL HD DIGITAL VIDEO RECORDER W/8G SD CARD
| Image sensor | 8 million pixel CMOS |
| Length | 120° Visual angle |
| Supported formats | 1920x1080P 1280x720P 848x480 |
| Monitor | 2.0 inch, TFT |
| Video output | HDMI CTS1.2 |
| Video format | NTSC |
| Image resolution | JPEG 2592x 1944 8M |
| Audio | integrated speaker/MIC |
| Battery | 3.7V/ 2000mAh |
| USB | USB2.0 |
| Dimension | main board 9 x 5 x 2cm; camera 6 x 3x5cm |
| Weight | main board 52g; whole system 190g |
, , , , , , Specifications:, , , , , , , , , , , Storage media: Internal 32M RAM, External support up to 32G SD card. (8G card supplied with the kit,can record 130 minutes HD video), , ,
Features: ALL THE PARTS OF THIS SYSTEM ARE FINE SELECTED ...1 Reviews
HiModel
100A CURRENT MODULE FOR CYCLOPS SERIES OSD SYSTEMS
| Current range | 0-100A |
| Max input voltage | 30V |
| Main board weight | 7.2g |
| module weight | 17g |
, , , , , , Specifications:, , , , , , , , , , , Current Module for CYCLOPS Series OSD Systems, *HINT: OSD main board only support 2-3S Lipo, when your main battery is higher than 3S, then you must use separate 2-3S battery pack to power the main board, otherwise it will burn the main board., , ,
Features: Compatible with Cyclops all series OSD systems. Includes/Requires: Includes: ...HiModel
HIMODEL 1.4G LOW PASS FILTER LPF1400 | SMA PLUG TO SMA JACK
| Antenna connector | SAM standard (male / female) (one end SMA plug, another end SMA jack) |
| Weight | 5g / 0.2oz |
| Cut frequency | 1.4G |
, , , , , , Specifications:, , , , , , , , , , , Low pass filter, Impedance 50Ω, Refer to here for connector type diagram, Handles RF power up to 8 watts, Characteristic impedance 50Ω., * This filter can only used for 1.4G or below video RX/TX system, does NOT suit for 2.4G or 5.8G system., , ,
Features: - Tiny size - Low weight, only 5g - ...HiModel
HDMI TO AV CONVERSION MODULE
| Signal input port type | standard HDMI |
| Video format supported | NTSC/ PAL |
| Power supply | 5V (not higher than 5.5V, suggested to use a separate UBEC to power the device) |
| Audio format | stereo PCM |
| Signal output | standard A/V |
| Weight | 39g/ 1.4oz |
| Dimension | 67x55x20mm |
, , , , , , Specifications:, , , , , , , , , , , Video input formats supported: 640*480@60Hz 800*600@60Hz 1280*1024@60Hz 1360*768@60Hz 1600*1200@60Hz 1920*1080@60Hz 480i@60Hz 480P@60Hz 576i@60Hz 576p@60Hz 720P50hz/60Hz 1080I/60Hz 1080P50hz/60Hz, , ,
Features: Convert HDMI signal to AV signal. Popular devices supported: ...HiModel
MINI HDMI TO HDMI CONVERSION CABLE V1.4 - 50CM - TYPE A
| Connector type | Mini HDMI to standard HDMI (golden plated connectors) |
| Wire length | 50cm |
| Protocol | V1.4 (support 1.3) |
, , , , , , Specifications:, , , , , , , , , , , Mini HDMI to HDMI Conversion Cable V1.4 - 50CM, Shielding layer number: 4, This is type A., There are two types of this cable, the difference is connector direction, typically type A suits for cameras like Panasonic GH1, GH2 and GH3 etc., and type B suits for Sony 5N, 7N etc., , ,
Features: Typical application: connect your video device with mini HDMI ...HiModel
MINI HDMI TO HDMI CONVERSION CABLE V1.4 - 50CM - TYPE B
| Connector type | Mini HDMI to standard HDMI (golden plated connectors) |
| Wire length | 50cm |
| Protocol | V1.4 (support 1.3) |
, , , , , , Specifications:, , , , , , , , , , , Mini HDMI to HDMI Conversion Cable V1.4 - 50CM Type B, Shielding layer number: 4, This is Type B., There are two types of this cable, the difference is connector direction, typically type A suits for cameras like Panasonic GH1, GH2 and GH3 etc., and type B suits for Sony 5N, 7N etc., , ,
Features: Typical application: connect your video device with mini HDMI ...HiModel
OS MINI OSD
| Battery voltage range | 7-16V. |
, , , , , , Specifications:, , , , , , , , , , , OS Mini OSD, , ,
Features: 1. It can check two voltages and overlap them ...2 Reviews
HiModel
REMZIBI OSD 5HZ GPS FOR FPV
| - Supply power requirement | 2V-30V (ie |
, , , , , , Specifications:, , , , , , , , , , , Remzibi's OSD Technical Data:, - Video voltage measurment range 0-25.2V, - Engine(ENG) voltage measurment range 0-25.2V, - General purpose ADC measurment - Build your own or use off the shelf components for many advanced readings - ie. Temperature, Amps, Air Speed, Prop Speed, RSSI, etc., - Video signals - standard PAL or NTSC, - GPS - any GPS 5V supply with NMEA protocol with TLL standard TX RX signals (however best results and advantages are with dedicated GPS module working 5Hz update position), - Printed OSD board size 29mmx39mm, , ,
Features: ArduPilot's best friend! Remzibi OSD is an incredible, very ...HiModel
EAGLE MICRO AEROPLANE FLIGHT CONTROLLER/ STABILIZATION A3 PRO
| Voltage Range | 4 - 6V DC |
| PWM Output | 50Hz/1520μs, 1020 ~ 2020μs |
| Full-Scale Range of Gyro | ±1000dps |
| Sample Rate of Gyro | 1KHz |
| Operating Temperature | -40 ℃ to 85 ℃ |
| Dimensions | 30 × 40mm |
| Weight | 8 g |
, , , , , , Specifications:, , , , , , , , , , , 【Specifications】, , ,
Features: THIS IS THE UPGRADING VERSION OF EAGLE A3. 【Features】 ...HiModel
POWER MANAGEMENT MODULE FOR YS-X4 FLIGHT CONTROL
, , , , , , Specifications:, , , , , , , , , , , Power Management Module for YS-X4 Flight Control, , ,
HiModel
CHOSEAL A/V CABLE 5 METERS
| Length | 5 meters |
, , , , , , Specifications:, , , , , , , , , , , CHOSEAL A/V Cable 5 Meters, , ,
Features: From famous Chinese professional A/V accessory supplier. Includes/Requires: Includes:1x ...