ReadyMadeRC
CAMERA CABLE (4-WIRE,6PIN FOR OLD VERSION RMRC-700XV)
PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera you need to use a regulator before the cable.,
This is a 4-wire camera lead with a 6 pin ...ReadyMadeRC
CAMERA CABLE (4-WIRE, FOR CAMERAS WITH AUDIO)
Directly compatible with the following cameras:, RMRC-600XV, RMRC-540, RMRC-480, RMRC-420 (not 420xv), PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera you need to use a regulator before the cable.,
This is a 4-wire camera lead compatible with many different ...ReadyMadeRC
HORNET OSD WITH GPS
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
HORNET OSD + FY31AP (FY-31AP TRADE EDITION)
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| Operating temperature(Unit | ℃) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
M.I.G. TRACKER (MAGNETIC, INERTIAL, GYRO) (V4)
| Power supply range | 2s-3s LiPo |
ReadyMadeRC
FAT SHARK PREDATOR VIDEO GLASSES
| FOV (field of view) | 25 degrees diagonal |
| Interpupillary (IPD) distance | 63.5mm (fixed) |
| Optional diopter lens inserts | -2, -4, -6 dpt Image size |
| User Controls | Channel selection |
| Power supply | 7 - 13 V (2S/3S supply) |
| Power consumption (@7.4V nominal) | 300mA wireless mode |
| Weight | 150g |
| Note | Fat Shark headsets use Airwaves brand RF modules. |
Package includes:, Predator goggles with integrated 5.8GHz receiver and MIG V4 head tracker, Optics:, Audio:, Stereo (optional headphones available, Electrical:, Antennae:, External (dipole included or circular polarized compatible), Mechanical:, Ergonomic molded headset, Head Tracker:, M.I.G. (magnetic/ inertial/ gyro) V4, Interface:, 3.5mm AV in/out port, Operating Frequencies:, 5.8 Ghz Receiver Module,
Closeout pricing, cannot be back-ordered. FREE SHIPPING! FatShark quality on ...ReadyMadeRC
FAT SHARK PREDATOR V2 250 VIDEO GLASSES W/TRANSMITTER AND CAMERA
| FOV (field of view) | 25 degrees diagonal |
| Interpupillary (IPD) distance | 63.5mm (fixed) |
| Optional diopter lens inserts | -2, -4, -6 dpt Image size |
| Power supply | 7 - 13 V (2S/3S supply) |
| Weight | 150g |
| Note | Fat Shark headsets use Airwave brand RF modules. |
Includes:, , Goggles Optics:, , Audio:, Stereo (optional headphones available, User Controls:, , Electrical:, , Power consumption (@7.4V nominal):, 300mA wireless mode, Antenna:, , Mechanical:, , Interface:, , Operating Frequencies:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
FatShark quality on a budget! Backed by the quick shipping ...ReadyMadeRC
FAT SHARK ATTITUDESD VGA VIDEO GLASSES
| Note | Battery, charger and adjustable earphones are sold separately. |
| Option 1 | The |
| Option 2 | If you want to share the power supply with your ground station, the |
| Option 3 | Any 2s-3s lipo with a 2.1mm barrell connector like |
| Interpupillary (IPD) distance | 59-69mm (adjustable) |
| Power input | 7-13V (2s/3s supply) |
| Power Consumption @7.4VDC | 200/350mA (direct/wireless) |
| Weight | 150g |
| Power Supply | 7-13V (2s-3s supply) |
| Power consumption | 310mA@7.4VDC |
| Transmitting Power | 250mW |
| Ch1 | 5740, CH2 |
| Mechanical | 55x26x11mm |
| Weight | 22g with antenna |
Features: Adjustable IPD, 35 degree FOV VGA display, secured rubber eyecups, lightweight, integrated 5G8 receiver and MIG V4 head tracker., Kit includes:, AtttitudeSD headset (with RX and HT) (Uses the high performance NexWaveRF receiver module), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
AttiudeSD (VGA, 640X480) FPV goggle with adjustable IPD, large 35 ...ReadyMadeRC
REMZIBI OSD PACKAGE
| - Supply power | 7V-14V (ex. lipo 2S - 3S) |
| - weight | 16 gram (OSD + dedicated GPS) |
| http | //www.happykillmore.com/Softwar...etup/Setup.exe |
| http | //www.happykillmore.com/Softwar...p?LANG=English |
| http | //rc-cam.pl/viewtopic.php?p=32498#32498 |
| Package Includes | Remzibi OSD |
Technical data :, Functionality :, - easily PC connection for configuration/calibration purposes using dedicated PC program (HappyKillmore's excellent work), show information DONE :, - latitude (format DDMM.MMMM or DD.DDDDDD can be chosen),
An excellent high quality, low price on screen display. Support ...ReadyMadeRC
FOUR OUTPUT VIDEO AMPLIFIER/SPLITTER
This one input, four output video signal distribution amplifier/splitter features independently adjustable variable level controls, one gold-plated RCA video input jack, and four gold-plated RCA video output jacks. Power input: 12 VDC. Video input level: 2.0Vp-p. Video output level: 0.5~1.5Vp-p. Output impedance: 75 ohms. Dimensions: 4.1" L x 2.9" W x 0.8 D. One year manufacturer's warranty. Mfg. #PLV2.,
Multi-video distribution amplifier One gold-plated RCA video input jack Four ...ReadyMadeRC
30DB ATTENUATOR WITH SMA CONNECTORS
| Frequency | 0-18GHz |
| VSWR | 1.35 |
| Power (Avg) | 2W @ 25C |
| Power (Peak) | 500W |
| Impedance | 50 Ohms |
| Attenuation Accuracy | +/- 0.75 dB |
Specifications:,
A great tool for testing the performance of equipment. Place ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
HERO3: BLACK EDITION
| Weighing in at a scant 2.6 ounces, the HERO3 | Black Edition is 25% lighter and 30% smaller than previous models. |
The Wi-Fi enabled HERO3: Black Edition is the most advanced GoPro, ever. No expense was spared during its development, resulting in a GoPro that is 30% smaller, 25% lighter and 2x more powerful than previous models. Wearable and gear mountable, waterproof to 197' (60m), capable of capturing ultra-wide 1440p 48fps, 1080p 60 fps and 720p 120 fps video and 12MP photos at a rate of 30 photos per second, the HERO3: Black Edition is the world's most versatile camera. Built-in Wi-Fi, GoPro App compatibility and the included Wi-Fi Remote (normally a separate $79.99 accessory) make the HERO3: Black Edition all the more versatile, still., The HERO3: Black Edition captures professional, cinema-quality video at 2X the resolution and 2X the frame-rate of previous models while delivering 2X better low light performance. Slow-motion aficionados and industry professionals will love the HERO3: Black Edition's 1080p-60, 720p-120, WVGA-240, 960p-100 and 1440p-48 video modes while those desiring a cinematic look will appreciate the ultra-high resolution 2.7KP-30 fps and 4KP-15 fps (Protune only) video modes., The HERO3: Black Edition's photo performance is 3X improved, now boasting 12MP burst capture at a staggering 30 frames per second with 2X better low light performance compared to previous models. Still Photo and Time-lapse Photo modes remain the same but are now joined by a new Continuous Photo mode that captures continuous 12MP stills at a steady 3, 5, or 10 photo-per-second rate, up to 30 photos at a time., The HERO3 Black Edition features built-in Wi-Fi and includes GoPro's Wi-Fi Remote accessory. The Wi-Fi Remote is normally available as a $79.99 accessory but is included with the HERO3: Black Edition. The Wi-Fi Remote is waterproof, wearable and can control up to 50 Wi-Fi-enabled GoPros at a time from a range of 600'. The HERO3's built in Wi-Fi means it can also be controlled by iOS smartphones and tablets running ,
Includes free 16GB class 10 micro SD card!!! Smaller, lighter ...ReadyMadeRC
TWINSTAR II KIT
Himax brushless power system upgrade:2x,
Multiplex Twinstar II FOR SHIPPING, IN THE US, PLEASE CHOOSE ...ReadyMadeRC
FUNJET ULTRA KIT
| Specifications | • Wingspan – 31 in. |
| Stock # M214245 | FunJet Ultra Kit |
Features:, • Easy to Hand Launch, Easy to Land, Recommended Power System:, FunJet Ultra Power Pack,
Just when you thought your Multiplex FunJet was one of ...