HobbyKing
TURNIGY 9X 9CH TRANSMITTER WITHOUT MODULE (MODE 2) (V2 FIRMWARE)
| Number of Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD |
| Support Type | Heli/Acro/Glid |
| Encoder type | ppm/pcm |
| Subtrim | Yes |
| Simulator Interface | Yes |
| Buzzer | Yes |
| Low Voltage Show | Yes |
| Required | Battery, Module, RX |
Support user:8, Stick model:4, Included:, Turnigy 9x 9Ch Transmitter only, Note:, The retail price of this radio is close to the original 9X with module and Receiver due to supply and demand. As this version is manufactured in much smaller quantities the cost price increases. This version of 9x is offered by request from customers wishing to use their own choice of module and receiver without the hassle of removing the module and wire from the original 9X.,
Due to popular demand, the Turnigy 9X is now available ...5 Reviews
HobbyKing
TURNIGY 9X 9CH TRANSMITTER WITHOUT MODULE (MODE 1) (V2 FIRMWARE)
| Number of Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD |
| Support Type | Heli/Acro/Glid |
| Encoder type | ppm/pcm |
| Subtrim | Yes |
| Simulator Interface | Yes |
| Buzzer | Yes |
| Low Voltage Show | Yes |
| Required | Battery, Module, RX |
Support user:8, Stick model:4, Included:, Turnigy 9x 9Ch Transmitter only, Note:, The retail price of this radio is close to the original 9X with module and Receiver due to supply and demand. As this version is manufactured in much smaller quantities the cost price increases. This version of 9x is offered by request for customers wishing to use their own choice of module and receiver without the hassle of removing the module and wire from the original 9X.,
Due to popular demand, the Turnigy 9X is now available ...5 Reviews
HobbyKing
HOBBYKING I86L MULTI-ROTOR CONTROL BOARD (LITE EDITION)
| The Hobbyking i86L Multi-Rotor Control Board supports | Tri copter |
| Input Voltage | 4v to 6v |
| Input signal | 50hz standard PPM |
| PWM Frequency | 400hz for ESC, 50hz for servos |
| Gyro scale | +/- 500dps, ODR |
| Operating temp | -40° C to 85° C |
| Size | 40mm x 40mm |
Specs:, Weight: 8g,
Hobbyking i86L Multi-Rotor Control Board (Lite Edition) features the same ...5 Reviews
DPCAV
R/C CONTROLLED ON-OFF SWITCH
| Weight | 7 grams. |
| Operating Voltage | 5VDC max, powered by R/C receiver. |
| Switched Output | Transistorized type, 30V / 10A max rating. |
| Compatibility | Most R/C receivers (Failsafe requires PPM Rx). |
| Servo Cable | Universal R/C type, 6 inches (150mm). |
| Switch Cable | Silicone wires, 3 inches (80mm). |
| Instructions | Click Me! |
Notes: The failsafe feature is compatible with standard PPM receivers. It will be ignored if used with DSP, PCM, or Spread Spectrum R/C systems. Also, if the switched output is powered by a separate battery, a common ground connection is required to the R/C system's battery (details are in the instruction manual).,
Plug this electronic switch into any spare channel on your ...HobbyKing
RMILEC RD4047P 10CH UHF RECEIVER (SUITS TS4047 TX MODULE)
| Frequency Range | 400MHz to 470MHz |
| F/S turn on condition | >0.99EBR |
| Antenna gain | 2.15DBM |
| Refresh rate | 40Hz |
| Hopping rate | 40Hz |
| Hopping cycle | 13Hz |
| Recover time | 77mS |
| Refresh rate | 66Hz |
| Hopping rate | 66Hz |
| Hopping cycle | 22Hz |
| Recover time | 45mS |
| Response Time | 4mS to 25mS |
| PWM Output range | 0.5mS-2.5mS |
| Recommend Supply Voltage | 3.5V to 8.4V |
| Damage voltage | >15V |
| Reverse breakdown voltage | >-15V |
| Output ports withstand voltage | >12V |
| Normal Current | <60mA |
| Operating Temperature | –40 to +80 °C |
| Low frequency Power supply noise filter | Include |
| High frequency noise filter | Include |
RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC RD4047P 10CH UHF receiver offers the ultimate in ...HobbyKing
RMILEC TS4047 10CH 2.5W UHF MODULE SYSTEM W/RECEIVER (FUTABA MODULE)
| Hardware frequency Range | 400MHz to 470MHz |
| Frequency stability | 2.5ppm |
| Output low-pass Filter | NONE |
| Frequency Range | 415Mhz-445Mhz |
| Step frequency | 480Khz |
| Step frequency | 30Khz |
| Low rate | 40Hz @10Kbps |
| High rate | 66Hz @15Kbps |
| RF interface impedance | 50 Ohm |
| Supply Voltage | 8.4V to 16V |
| Reverse battery protection | NONE |
| Logic Voltage | 3-12V |
| Frequency Range | 400MHz to 470MHz |
| F/S turn on condition | >0.99EBR |
| Antenna gain | 2.15DBM |
| Refresh rate | 40Hz |
| Hopping rate | 40Hz |
| Hopping cycle | 13Hz |
| Recover time | 77mS |
| Refresh rate | 66Hz |
| Hopping rate | 66Hz |
| Hopping cycle | 22Hz |
| Recover time | 45mS |
| Response Time | 4mS to 25mS |
| PWM Output range | 0.5mS-2.5mS |
| Recommend Supply Voltage | 3.5V to 8.4V |
| Damage voltage | >15V |
| Reverse breakdown voltage | >-15V |
| Output ports withstand voltage | >12V |
| Normal Current | <60mA |
| Operating Temperature | –40 to +80 °C |
| Low frequency Power supply noise filter | Include |
| High frequency noise filter | Include |
Included in box:, TS4047 transmitter module (Futaba style), TS4047 Module Specifications:, Channel :70, Frequency Range:, 433.05MHz -434.79MHz, Channel:70, Low Output Power:, 30DB -31DB Peak (0.9W-1.2W), High Output Power:, 33DB -34DB Peak (1.9W-2.5W), Current:, 330mA/520mA (@50 Ohm load,12V Supply Voltage), Temperature:, 50 to 70 Degrees Celsius, RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC TS4047 10CH 2.5W UHF Module System offers the ...HobbyKing
ZYX-GS CAMERA GIMBAL STABILIZATION SYSTEM 3-AXIS GYRO/ACCELEROMETER
| Weight | 26g |
| Supported RC | PPM/PCM/2.4G |
| Operating supply | DC3.5V~9V |
| Operating current | 60mA |
| Operating temperature | -15º~65º |
| Max angular rate | 2000º/sec |
| Max acceleration | 16g |
| Refresh rate | 800Hz |
Features:, • Three axis MEMS gyro and accelerometer stabilization (pan/tilt/roll), Specs:, Size:, 38x29x13mm / 27x27x9mm, Control range:, -45º~45º (roll), -180 º ~180 º (pan), -135º~90º (tilt),
The all new ZYX-GS precision gimbal stabilization system provides dedicated ...5 Reviews
HobbyWireless
M.I.G. HEAD TRACKER FOR FUTABA, DX8, FLYSKY, TH9B, IMAX 9X, TURNIGY 9X AND MORE...
| - Futaba | in general Futaba 7 series radios and above support the HT |
| Unsupported radios | - Hitec Aurora9 |
Details:, Fatshark came out with M.I.G, a new head tracking system that uses a combination of Magnetic Inertion Gyro, Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
sensors that self-corrects any drift. No need to be pointing ...RCPlanet
FUTABA MPDX-1 MULTI-PROPORTIONAL 8CH DECODER FUTM4158
, Dimensions:, 29.6x39.3x15.8mm, Weight:, 14.2g, Operation power requirement:, 4.8 or 6.0V (4~5 NiCad batteries), Current drain:, 7.5mA, Number of multi-prop output channels:, 8, Applicable modulation modes:, PCM G3, PCM1024, PPM, Multiplexing scheme:, Pulse width division (PCM G3, PCM1024), time division (PPM), Delay function:, Programmable for each channel, Fail-safe function:, F/S function/HOLD function can be selected for each channel, ,
Plug the MPDX-1 into one channel of any PCM G3, ...HiModel
SKYRC I-METER MULTIMETER 7 IN 1
| Max input voltage | 60V |
| Voltage measurement range | 2-8S LiPo/LiFe/LiIon |
| Voltage display resolution | 0.001V |
| Volt Port | 2.54mm pitch pins, 9 pins |
| Max current | 100A |
| Shunt resistance | 0.001ohm |
| Displayed resolution A | 0.01 |
| Temperature resolution | 1 Celsius / 1 Fahrenheit |
| PPM signal output | 750uS – 2150uS |
| Number of propeller measurable | 1 to 5 |
| Propeller rotating range | 1-60000RPM |
| Dimension | 95.3x72.8x21.5mm |
| Net Weight | 85g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: FEATURES 1. Battery Checker 2. Battery Internal Resistance 3. ...HiModel
WFLY 72.430MHZ CH.32 FM DUAL CONVERSION RECEIVER CRYSTAL
| Frequency | 72.430 Mhz |
| Channel | Ch. 32 |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., * This crystal only work with dual conversion receivers, does not work with single conversion receivers., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini sizeHiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
| ● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
| ● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
| ● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
WFLY 40.790MHZ CH.79 FM DUAL CONVERSION CRYSTAL (SET)
| Frequency | 40.790 Mhz |
| Channel | 79 Ch. |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini size 1 X ...HiModel
WFLY 72.130MHZ CH.17 FM DUAL CONVERSION RECEIVER CRYSTAL
| Frequency | 72.130 Mhz |
| Channel | 17 Ch. |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini sizeHiModel
WFLY 72.310MHZ CH.26 FM DUAL CONVERSION RECEIVER CRYSTAL
| Frequency | 72.310 Mhz |
| Channel | Ch. 26 |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., * This crystal only work with dual conversion receivers, does not work with single conversion receivers., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini size